AS350 and AS355 – RENEW YOUR FLEET. ORDER Like NEW from HELIPRODUCTS. Call us about a fleet renewal program where your asset stays in the fleet and after a visit to Heliproducts returns with increased value and serviceability.

Benefits to keeping your fleet: – Known Aircraft are easiest to continue within your operational systems, local airworthiness approvals, contractual approvals and your customers own recognition and comfort level. – All tracking from accounting to maintenance, registrations, advertising, training, pilot requirements remain in place. – Operational equipment and pilot awareness remains in place for the known helicopter model. –  No need in recognizing taxable gain on the sale of the old assets. The taxes which otherwise would have been due from the sale are thus deferred. – Replacement costs, insurances, training, legal and banking liabilities likely to increase with full replacement of an aircraft model / type.

Thanks to the exceptional skills of our team and the complete selections of replacement parts, components, stc kits and engines, we bring new life and usefulness to proven helicopters. From new instruments and interiors to structural and components repairs, Heliproducts Industries  has the experience and know-how to put previously used and legacy helicopters back into the sky.

Heliproducts Industries Ltd provides a full range of Airbus Helicopters support services at our Pitt Meadows Airport facility. We pride ourselves in very custom completed helicopters based on the operators direct needs, with every detail provided, without adding unwanted equipment, systems, weight, and cost. Through complete equipment, tooling and dedicated maintenance hangars, we are equipped to support both domestic and international customers.

 

FOR THIS PROJECT – We receive an AS350B2 for with Turbomeca Arriel 1D1 engine. A quick turnaround is required. Full Tour equipment and floats required.

The 7 Place Interior consists of a composite-structure 2 Place Forward Passenger Seat on the right-hand side of the cockpit as well as, the Left-hand Pilot Installation. The seat is installed on fixed rails on the cabin floor and is removable by use of quick-release fasteners. A four point seatbelt and shoulder harness is provided for each front occupant of the seating arrangement. The pilot-in-command position is moved from the right to the left side, along with all associated flight controls and other cockpit controls and instrumentation.

CAPACITY
Passenger transportation – Tour Config.  Pilot + 6 passengers (high density version)
1 pilot + 6 passengers (high density version)
Cargo 1 pilot + 3 m3 (105.9 ft3) in the cabin
WEIGHTS
Maximum take-off weight 2,250 kg / 4,960 lb
Maximum take-off weight with external load 2,500 kg / 5,512 lb
Empty weight (standard configuration) 1,220 kg / 2,690 lb
Useful load (standard configuration) 1,030 kg / 2,270 lb
Maximum cargo-swing load 1,160 kg / 2,557 lb
Standard fuel capacity 426 kg / 939 lb
POWER PLANT 1 TURBOMECA ARRIEL 1D1 TURBINE ENGINE
Takeoff power 546 kW / 732 shp
PERFORMANCE AT MAXIMUM GROSS WEIGHT AT SEA LEVEL, ISA AND ZERO WIND CONDITION
Maximum speed (Vne) 287 km/hr / 155 kts
Fast cruise speed (at MCP) 246 km/hr / 133 kts
Recommended cruise speed 226 km/hr / 122 kts
Rate of climb at SL 8.5 m/sec / 1,675 ft/min
Service ceiling 4,600 m / 15,100 ft
Hover ceiling at takeoff power ISA-IGE 3,000 m / 9,850 ft
Maximum range without reserve at recommended cruise speed (RCS) 666 km / 360 NM
Endurance without reserve at 100 km/hr – 54 kts 4hrs, 24 min
OPERATION LIMITATIONS
Maximum altitude (PA) 6,100 m / 20,000 ft
Minimum temperature – 40°C / + 40°C
Maximum temperature ISA + 35°C / + 95°F, limited to + 50°C / + 122°F

BEFORE HELICOPTER ARRIVES – HELIPRODUCTS COMPLETES FULL PAINT AND ASSEMBLY OF ALL EXCHANGE ITEMS.

 

DSC_0013a

DSC_0027s

DSC_0026s

DSC_0166s

DSC_0170s

5O4A1455 small 5O4A1446 small

DSC_0055s

COMPONENT SHOP COMPLETE EXCHANGE ITEMS TO BE REPLACED.

Tail Rotor Spiders MR Shaft 6 Years Hydraulic Pump Drives Mast 12 Year Checks

12512511_

AVIONICS DEPARTMENT DESIGNS NEW INSTRUMENT PANEL LAYOUT. ADDING RADAR ALTIMETER AND ADS-B COMPLIANT XPDR. COMPLETE NEW ICS AND BOSE HEADSETS ADDED. NEW HELIPRODUCTS LED LIGHTING STC.

1124_001 (2)

5O4A2384 small

 

HELICOPTER ARRIVES FOR REFIT.

DSC_0069s

DSC_0091a

DSC_0179a

DSC_0172a

DSC_0218a

DSC_0201a

DSC_0222a

DSC_0184s

DSC_0272s

DSC_0308sa

DSC04175s

DSC04183s DSC04184s

DSC04193s

DSC04176s

DSC04179s DSC04191s DSC04180s DSC04188s

IMG_8354s

DSC04210s

DSC_0446s DSC_0449s DSC_0451s

DSC04220s DSC04224s DSC04238s DSC04246s

 

IMG_8354s
Contact us for more information on our maintenance and upgrade services. Call 604.465.5008 or email us at